Title: Low Shaft Furnace Smelting ofPig Iron in India
Abstract:AS IRON and steel enter in all other industries in some form or other, the industrialisation of a country
depends on the production of iron and steel. Production
of pig iron, which is ultimately con...AS IRON and steel enter in all other industries in some form or other, the industrialisation of a country
depends on the production of iron and steel. Production
of pig iron, which is ultimately converted into steel, depends on the availability of raw materials like iron-ore, and coking coal of suitable grades. The conventio-
nal method depends on the reduction of lumpy iron-ore or sintered iron-ore with abrasion resistant coke in prese-nce of limestone in a blast furnace. The increase is the height of the furnace to increase the capacity and ther-
mal efficiency necessitates the use of good strong coke
which call only be obtained by carbonisation of coking coal. As the modern blast furnace consumes 1,500-2,000
lb of coke per ton. of pig iron, considerable attention
is paid to minimise the coke-rate and thereby reduce the cost of iron production.For this purpose the temperature of the blast furnace gas should be as low as possible to reduce the sensible heat carried away by the gas and the,
ratio of CO : CO2 in the top gas should be as near as possible to the equilibrium value. Both these factors
have contributed towards the increase in the height of
the furnace. Requisite raw materials for blast smelting are becoming scarce, as in some countries coking coals
are not available and the ores are soft and obtained as fines.Read More
Publication Year: 1959
Publication Date: 1959-08-01
Language: en
Type: article
Access and Citation
AI Researcher Chatbot
Get quick answers to your questions about the article from our AI researcher chatbot