Title: Propuesta de aplicación del método de auto-curado adicionando ladrillo triturado al agregado grueso para disminuir las fisuras superficiales y aumentar la resistencia a la compresión del concreto en zonas cálidas (Lima Norte)
Abstract: El concreto es uno de los materiales más utilizados en el mundo de la construcción, de las cuales cada material en la mezcla depende de la resistencia que se requiera de acuerdo al análisis estructural. Dentro del proceso de producción de concreto debemos garantizar que el cemento reaccione químicamente y desarrolle la resistencia para la cual fue diseñada, para esto es importante mantenerlo hidratado en ese tiempo mediante el proceso de curado. Una técnica aún no tan conocida es el auto-curado del concreto, por lo cual es una necesidad saber cuál es su influencia en el desarrollo de la resistencia y en la disminución del porcentaje de agrietamiento del concreto en estado plástico. El objetivo de esta tesis es determinar la influencia que tiene el reemplazar un cierto porcentaje de ladrillo triturado como reemplazo del agregado grueso; evaluando la resistencia a la compresión, resistencia a la flexión, y el agrietamiento por contracción plástica del concreto. Se desarrolló con 3 diferentes porcentajes de reemplazo de ladrillo triturado que son: 15%, 21%, 27% del peso del agregado grueso para la resistencia a la compresión (f’c) de 280 kg/cm2. Se concluyó que reemplazo del agregado grueso por ladrillo triturado es efectivo cuando es usado hasta un máximo de 21%. Los resultados obtenidos son óptimos y viables en el tiempo, mostrándonos un aumento en la resistencia a la compresión, resistencia a la flexión y la disminución del porcentaje de fisuras en estado plástico.