Title: Thermoplastic Composites reinforced with Multi-layer Woven Jute Fabric: A Comparative Analysis
Abstract:Three commonly available thermoplastic matrices – High-density polyethylene (HDPE), polypropylene (PP) and nylon 6 – are reinforced with hessian jute fabric in multi-layer sequence to prepare composit...Three commonly available thermoplastic matrices – High-density polyethylene (HDPE), polypropylene (PP) and nylon 6 – are reinforced with hessian jute fabric in multi-layer sequence to prepare composite laminates by compression moulding technique. The composite had a nominal fibre content of 18% in terms of weight and a nominal thickness of 6.5 mm. The mechanical and fracture behaviours of the resultant laminates are tested and compared. It was found that the Nylon-Jute composite exhibited the highest values of tensile strength, Young's modulus, flexural strength, flexural modulus and hardness. On the other hand, HDPE-Jute composite showed relatively poor performance. Interestingly, the HDPE-Jute composite exhibited the highest impact strength and the Nylon-Jute composite was the poorest in this regard. The amount of water absorption by the composites from highest to the lowest was found in the following order: Nylon-Jute > HDPE-Jute > PP-Jute.Read More