Title: Improving the Quality and Electrical Properties of Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate) (PEDOT:PSS) Film by Heating and Stirring the Solution
Abstract: The improvement of the quality and electrical properties of a film will contribute to the stability and performance of an electronic product during component manufacturing.However, the pristine solution concentration ratio of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) to water is in the range of only 1.0-1.3wt%.Therefore, the pristine conductivity of PEDOT:PSS is poor because the conductive PEDOT is dispersed in excess water, resulting in the limitation of carrier transmission.In this study, a simple method of removing excess water in PEDOT:PSS solution by heating and stirring is proposed.The heating and stirring of the PEDOT:PSS solution can not only change the structure but also increase the conductivity of the PEDOT:PSS film.It is an effective method of improving the quality and electrical properties of the film simultaneously.Moreover, the fabrication process for the PEDOT:PSS film in this study is different from that of the commonly used multilayer film.A single film of high quality can be obtained in a short process time by heating and stirring.A high-quality single film is better than a multilayer film.