Title: Preparation of highly active MCM-41 supported Ni 2 P catalysts and its dibenzothiophene HDS performance
Abstract: Highly active MCM-41 supported nickel phosphide catalysts for hydrodesulfurization (HDS) were synthesized by two different phosphorus sources, in which the surface of Ni2P catalysts were modified by air instead of being passivated by O2/N2 mixture. In addition, the catalysts need not be activated with flowing H2 (30 ml·min− 1) at 500 °C for 2 h prior to reaction as traditional method. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), N2-adsorption specific surface area measurements and CO chemisorption were used to characterize the resulting catalysts. The effect of modification with air on the surface of the catalysts for HDS performance was investigated. Results showed that the surface modification with air can promote the formation of smaller Ni2P particles and more active Ni sites on surface of catalysts. At 3.0 MPa and 613 K, the dibenzothiophene (DBT) conversion of the catalysts modified with air was 98.7%, which was 7.1% higher than that of catalyst passivated by O2/N2 mixture. The higher activities of Ni2P(x)/M41-O catalysts can be attributed to the smaller Ni2P particles sizes and the increased hydrogen dissociation activity due to the surface modification.
Publication Year: 2017
Publication Date: 2017-09-19
Language: en
Type: article
Indexed In: ['crossref']
Access and Citation
Cited By Count: 17
AI Researcher Chatbot
Get quick answers to your questions about the article from our AI researcher chatbot