Title: The Separation Method for Removing of Colloidal Particles from Raw Water
Abstract: The objective of this study was to develop a treatment system that can effectively reduce the concentration of colloidal particles in raw water that can greatly reduce the cost of treatment and improve the subsequent steps of treatment. Aluminum sulphate (alum) and ferric chloride as a coagulant and anionic polymer as coagulant aid were used in the process that changed the scale of particles from nanoscale to microscale and larger by a physico-chemical process. The influence of PH, temperature, coagulant and coagulant aid dosages on the coagulation process was studied and conditions were optimized corresponding to the best removal of organic matters, viruses, colloids, bacteria, color and decrease in turbidity. 85-98% reduction of turbidity from raw water can be achieved by using the optimum coagulant dosage (8ppm, ferric chloride/10 ppm, alum) in the optimum PH range (9.2, ferric chloride/8.5, alum) in the optimum temperature (20°C, ferric chloride/24°C, alum). Ferric chloride produced better results than alum. Higher dosages did not significantly increase pollutant removal and were not economical. The results provide useful information for raw water treatment.
Publication Year: 2008
Publication Date: 2008-01-01
Language: en
Type: article
Access and Citation
Cited By Count: 75
AI Researcher Chatbot
Get quick answers to your questions about the article from our AI researcher chatbot