Title: Wall Heat Flux Partitioning During Subcooled Flow Boiling: Part 1—Model Development
Abstract: In this work a mechanistic model has been developed for the wall heat flux partitioning during subcooled flow boiling. The premise of the proposed model is that the entire energy from the wall is first transferred to the superheated liquid layer adjacent to the wall. A fraction of this energy is then utilized for vapor generation, while the rest of the energy is utilized for sensible heating of the bulk liquid. The contribution of each of the mechanisms for transfer of heat to the liquid—forced convection and transient conduction, as well as the energy transport associated with vapor generation has been quantified in terms of nucleation site densities, bubble departure and lift-off diameters, bubble release frequency, flow parameters like velocity, inlet subcooling, wall superheat, and fluid and surface properties including system pressure. To support the model development, subcooled flow boiling experiments were conducted at pressures of 1.03–3.2 bar for a wide range of mass fluxes 124-926kg/m2 s, heat fluxes 2.5-90W/cm2 and for contact angles varying from 30° to 90°. The model developed shows that the transient conduction component can become the dominant mode of heat transfer at very high superheats and, hence, velocity does not have much effect at high superheats. This is particularly true when boiling approaches fully developed nucleate boiling. Also, the model developed allows prediction of the wall superheat as a function of the applied heat flux or axial distance along the flow direction.
Publication Year: 2005
Publication Date: 2005-02-01
Language: en
Type: article
Indexed In: ['crossref']
Access and Citation
Cited By Count: 229
AI Researcher Chatbot
Get quick answers to your questions about the article from our AI researcher chatbot