Title: Mechanical properties and morphology of polypropylene composites. Talc‐filled, elastomer‐modified polypropylene
Abstract: Abstract The balance of impact strength and rigidity of polypropylene can be significantly improved by physical blending of the polypropylene with a talc filler and a variety of elastomer types. Unsaturated elastomers were found to be effective impact strength improvers in 70/15/15 percent PP/elastomer/talc composites, whereas saturated elastomers gave rise to a high stiffness of such compounds. This is attributed primarily to different tendencies of the elastomers to coat the filler surface. Studies on a wider range of compositions, using a butadienestyrene‐butadiene (SBS) block copolymer and a ethylene‐propylene‐diene (EPDM) terpolymer as representatives of the two elastomer classes, indicated that at high stiffness levels (flexural modulus > 1.6 GN/m 2 ), the composites with SBS show the best balance of properties, whereas at higher impact levels EPDM leads to a higher rigidity and impact strength. On the basis of morphological studies such differences can be explained qualitatively, in spite of the complex structure of these composites.
Publication Year: 1984
Publication Date: 1984-07-01
Language: en
Type: article
Indexed In: ['crossref']
Access and Citation
Cited By Count: 90
AI Researcher Chatbot
Get quick answers to your questions about the article from our AI researcher chatbot