Title: The debris of the Frank Slide and theories of rockslide–avalanche mobility
Abstract:The Frank Slide, a 30 × 10 6 m 3 rockslide–avalanche of Palaeozoic limestone, occurred in April 1903 from the east face of Turtle Mountain in the Crowsnest Pass region of southwestern Alberta, Canada....The Frank Slide, a 30 × 10 6 m 3 rockslide–avalanche of Palaeozoic limestone, occurred in April 1903 from the east face of Turtle Mountain in the Crowsnest Pass region of southwestern Alberta, Canada.The reconstruction of the Canadian Pacific Railway (CPR) line created a cut up to 16 m high across the deposit, giving a unique cross section nearly the depth of the debris. The debris shows vertical sorting. The base material is crushed limestone, mainly of sand and gravel size, and contains rounded pebbles from till or alluvial deposits on the surface of separation. The upper surface of the debris is an accumulation of large, predominantly angular boulders. Grain-size analyses by sieving and by "area-by-number" counts demonstrate a gradual increase in grain size with height above the base of the cut. Such inverse grading with fines concentrated at the base of the debris indicates that the landslide was not fluidized by gas pore pressures.The base material has run ahead of the coarse debris of the slide, which usually forms a second distinct scarp up to 300 m from the edge of the slide debris. Lateral ridges and distal rims have formed at only three places on the slide's margins, all close to crests of steep slopes the debris has run up. The Frank Slide then is not a slide of Shreve's Blackhawk type. Support for boulders in the debris probably came from dispersive forces and motion-induced vibration.Read More
Publication Year: 1986
Publication Date: 1986-03-01
Language: en
Type: article
Indexed In: ['crossref']
Access and Citation
Cited By Count: 181
AI Researcher Chatbot
Get quick answers to your questions about the article from our AI researcher chatbot