Title: Influence of martensite transformation strain on the ductility of dual-phase steels
Abstract: The austenite-to-martensite transformation expansion during quenching of steels from intercritical temperatures results in plastic deformation of a region of ferrite near each martensite particle. The localized ferrite plastic strain lowers slightly the overall ductility of the ferrite and, hence, the dual-phase steel. The extent to which this occurs was investigated theoretically by determining the extent of the ferrite plastic zone, the average dislocation density within that zone, the effective overall increase in ferrite dislocation density and an associated strain εdm. The value εdm, when incorporated into a previous derivation of composite true uniform strain, was found to decrease the ductility of dual-phase steels. The magnitude of this decrease was largest for martensite volume fractions between 0.3 and 0.5 and was determined to be less than 0.02. La dilatation à la transformation de l'austénite en martensite au cours de la trempe des aciers à partir de températures intercritiques conduit à la déformation plastique d'une région de ferrite au voisinage de chaque particule de martensite. La déformation plastique localisée de la ferrite abaisse légèrement la ductilité générale de la ferrite et donc de l'acier diphasé. Nous avons étudié théoriquement dans quelle mesure ceci se produisait en déterminant la grandeur de la zone plastique ferritique, la densité moyenne de dislocations dans cette zone, l'accroissement effectif total de la densité de dislocations dans la ferrite et une déformation associée εdm. La valeur de εdm, introduite dans un calcul anténeein de la déformation uniforme vraie d'un composite, abaissait la ductilité des aciers diphasés. Cette diminution était maximale pour des fractions volumiques de martensite comprises entre 0,3 et 0,5 et elle était inférieure à 0,02. Die Umwandlung von Austenit in Martensit führt während des Abschreckens eines Stahles von interkritischen Temperaturen zu Dehnungen, durch die der Ferrit im bereich der martensitteilchen verformt wird. Diese lokale Verformung verringert die Gesamtduktilität des Ferrits und damit des Stahles ein wenig. Das Ausmaβ dieser Duktilitätsverringerung wurde theoretisch untersucht, indem die Gröβe der plastischen Zone, die mittlere Versetzungsdichte, die effektive Zunahme der Versetzungsdichte im gesamten Ferrit und die zugehörige Dehnung εdm bestimmt wurden. Wenn dieser Wert εdm in eine frühere Ableitung der wahren Gesamtdehnung eingesetzt wird, dann folgt eine verringerte Duktilität des zweiphasigen Stahles. Die Verringerung ist am gröβten bei Volumanteilen des Martensits zwischen 0,3 und 0,5 und ergab sich zu kleiner als 0,02.
Publication Year: 1983
Publication Date: 1983-04-01
Language: en
Type: article
Indexed In: ['crossref']
Access and Citation
Cited By Count: 77
AI Researcher Chatbot
Get quick answers to your questions about the article from our AI researcher chatbot