Title: The effect of pilot hole on delamination when core drill drilling composite materials
Abstract: Removal of chips is a serious problem when core drill drilling polymer composites. As the chip is formed it moves to the inner hole of core drill. A hole is pre-drilled to eliminate the thrust caused by the removal chip, thus the threat for delamination is significantly reduced. The diameter of the pre-drilled hole is set equal to the inner hole of core drill. A smaller diameter of pilot hole cannot solve the problem of removal chips, while a larger one tends to cause undesired delamination during pre-drilling. Although valuable efforts have been made for the analysis of drilling-induced delamination, little has been reported on the effect of pilot hole diameter on delamination for core drills. The design of drill tools can be improved using obtained results.
Publication Year: 2006
Publication Date: 2006-10-01
Language: en
Type: article
Indexed In: ['crossref']
Access and Citation
Cited By Count: 71
AI Researcher Chatbot
Get quick answers to your questions about the article from our AI researcher chatbot