Title: Complex Wall Injector Array for High-Speed Combustors
Abstract: This paper presents the results of experimental and numerical studies of an array of injectors combining inclined circular and diamond-shaped sonic nozzles for application to high-Mach-number airbreathing vehicles with light-gas fuels. The freestream Mach number was 4, and helium was used as the injectant to safely simulate hydrogen fuel. The diamond injector provided improvements in penetration of more than a factor of 2, compared with the circular injectors. This is a greater increase than had been inferred earlier by comparing test results with isolated diamond and circular injectors. The rate of mixing as indicated by the decay of maximum concentration in the plume was about the same. Computational fluid dynamics with a Reynolds-averaged Navier-Stokes formulation was applied to this flow problem with four different turbulence models. The helium-mixing predictions from the four turbulence models showed that the simulations are heavily impacted by the turbulence model selection. None of the turbulence models were able to accurately simulate the helium mixing shown in the experiment, but some models did much better than others. From the selected models, the Wilcox k-w model had the best correlation with the experimental helium-concentration profiles. The computational fluid dynamic solutions were also probed to elucidate the behavior of the flow in the plumes from the circular and diamond injectors. From a design point of view, these results show that it is useful to combine inclined diamond and circular injectors to achieve good fuel coverage and fuel/air mixing across a combustor.
Publication Year: 2008
Publication Date: 2008-07-01
Language: en
Type: article
Indexed In: ['crossref']
Access and Citation
Cited By Count: 30
AI Researcher Chatbot
Get quick answers to your questions about the article from our AI researcher chatbot