Title: Experimental study on extrudate swell and die geometry of profile extrusion
Abstract:Abstract The objective of this study was to determine the die swell behavior of a polymer melt and to design a die for forming a polymeric extrudate with a desired shape using profile extrusion. Polys...Abstract The objective of this study was to determine the die swell behavior of a polymer melt and to design a die for forming a polymeric extrudate with a desired shape using profile extrusion. Polystyrene pellets were chosen to perform the profile extrusion experiments. First, the polystyrene pellets were melted and pushed through a quarter ring profile. The profile of the swelled extrudate agreed with the numerical predictions. A modified die was designed to produce a quarter ring profile extrudate based on the direct extrusion problem (DEP) prediction. Polystyrene pellets were also melted and pushed through the modified die. The experimental results were close to the computational results. The melting temperature, die length, and melting residence time affect die swell behavior. The die swell ratio becomes smaller as the melting temperature and melting residence time are increased. As the die length is increased, the die swell ratio is lowered. According to the die geometry predictions, an extrudate with the desired profile can be made precisely.Read More
Publication Year: 2000
Publication Date: 2000-05-01
Language: en
Type: article
Indexed In: ['crossref']
Access and Citation
Cited By Count: 31
AI Researcher Chatbot
Get quick answers to your questions about the article from our AI researcher chatbot