Title: High performance superplasticized silica fume mortars for ferrocement works
Abstract:Ferrocement works demand cement mortars of good workability and high strength. Reduction in water-cement ratio combined with a refined pore structure increases the compressive strength in addition to ...Ferrocement works demand cement mortars of good workability and high strength. Reduction in water-cement ratio combined with a refined pore structure increases the compressive strength in addition to the enhancement of durability characteristics, but the workability decreases. Workability becomes important, as the mortar has to easily penetrate between the layers of the mesh wires. A reasonably workable high strength cement mortar can be obtained by using a high cement content coupled with the use of superplasticizers. These were also found to retain the cohesiveness and check undesirable bleeding and segregation. An experimental program was conducted to study the functional efficacy of an SNF condensate used as a water reducing superplasticizer. The compressive strength and flow characteristics of the mortars were determined to decide their suitability for ferrocement works. The parameters included the mix proportions, the grade of cement, age of curing and the dosage of superplasticizer. It was concluded from the study that the addition of an optimum dosage of superplasticizer improved the workability and strength characteristics of silica fume mortars. There was a late gain in the compressive strength of silica fume mortars.Read More