Title: Oxygen measurements in stagnant lead–bismuth eutectic using electrochemical sensors
Abstract: Sensors are the major part of an active oxygen control system (OCS) to be used in ADS reactors employing lead bismuth eutectic (LBE). We tested Pt/air and Bi/Bi2O3 probes based on yttria-stabilized zirconia (YSZ) solid electrolytes. The sensors were calibrated by evaluating the electromotive force (EMF) – temperature dependencies in oxygen un-/saturated stagnant LBE compared to the van't-Hoff's isotherm. Also, probe kinetics while changing the H2/H2O ratio was studied. Typical, reproducible curves are presented confirming attainment of oxygen equilibrium between the fluids. The sensor outputs are deterministic, predictable. Exceptional small drifts were due to interfacial kinetics, not to the sensors behavior. Simultaneous testing of several probes in one melt was performed. The sensors seemed to be qualified for large scale use.
Publication Year: 2004
Publication Date: 2004-10-13
Language: en
Type: article
Indexed In: ['crossref']
Access and Citation
Cited By Count: 38
AI Researcher Chatbot
Get quick answers to your questions about the article from our AI researcher chatbot